Underlay felt for standing seam flat sheet metal
Traditional system of water-draining roofing underlay with a sanded surface for the outer roof of sheet metal with standing seams.
Products in system solution
A traditional and robust roofing underlay with a sanded surface.
Flexible, self-adhesive moisture protection primarily used under eaves, valleys, ridges, and joints for roof cassettes. The top side is coated with polyester fabric as a surface layer, the underside with self-adhesive bitumen adhesive with protective foil. When used under the eaves and together with standing seam, folded metal roofing, the adhesive side is turned upwards.
Used as adhesive where other products lack a self-adhesive surface. Examples include valleys, pass-throughs, and when upturns against wall sections connect out onto the roof surface.
Roofseal-T is a black single-sided adhesive tape that is flexible and easy to apply. The product is available both on a roll and as sheets. The tape on the roll has a split protective film (slit) for optimal taping in corners.
Primer as an adhesion enhancer for underlay fabric and roofing underlay. Used when needed before using Sealant Adhesive and certain sealing tapes like Roofseal-T.
