T-Roof Multi Strip on ridge
Roofseal-T sealing at dormer
T-Roof Muli Strip in valley
T-Roof Multi Strip under base plate
Underlay fabric for standing seam flat sheet
Modern system of sand-free, water-draining underlay fabric for outer roofs of seam-covered flat sheet metal. The system withstands very long exposure during construction time.
Products in system solution
The T-Roof Epic underlayment is thinner but significantly stronger than traditional roofing underlay. At the same time, it is more flexible and easier to work with. T-Roof Epic has a long exposure time and can withstand 12 months without sheet metal covering. The solution is well-suited for flat metal roofs as its special design provides a very thin overlap seam.
Flexible, self-adhesive moisture protection primarily used under eaves, valleys, ridges, and joints for roof cassettes. The top side is coated with polyester fabric as a surface layer, the underside with self-adhesive bitumen adhesive with protective foil. When used under the eaves and together with standing seam, folded metal roofing, the adhesive side is turned upwards.
Used as adhesive where other products lack a self-adhesive surface. Examples include valleys, pass-throughs, and when upturns against wall sections connect out onto the roof surface.
Roofseal-T is a black single-sided adhesive tape that is flexible and easy to apply. The product is available both on a roll and as sheets. The tape on the roll has a split protective film (slit) for optimal taping in corners.
Primer as an adhesion enhancer for underlay fabric and roofing underlay. Used when needed before using Sealant Adhesive and certain sealing tapes like Roofseal-T.
