T-Roof Multi Strip
T-Roof Multi Strip is a fully adhesive, single-sided black underlay strip made of bitumen. It is constructed with a strong polyester core, impregnated and coated with SBS-bitumen. A durable UV-protected polyester fabric is used as the surface layer. The underside is coated with bitumen adhesive and protective film. The film is removed during installation.
Fully glued underside, flexible and smooth
Adheres on both sides when used on the ridge
Can be turned with adhesive up and seal better under the base plate
Adheres and secures easily in the valley gutter
Application Area
The product is used as an eaves strip, ridge strip, valley lining in a valley gutter, or as condensation and moisture protection for all roofs under metal details. In roof cassette systems, it can be used as a joint strip for battened and non-battened roofs (battened ≥ 10°, non-battened ≥ 6°).
Installation
Installation is self-adhesive against the surface, see separate installation instructions.
Important!
- The product should not be combined with surface layers that are hot air mounted (welded).
- Carefully check the adhesion strength after installation. Consider adverse weather conditions and ensure temporary fixation of the assembly or protective covering until the permanent surface layer is installed!
- The adhesive surface has aggressive adhesion under normal conditions! In cooler weather (< +10°C), there may sometimes be a need to improve the adhesion. Use a heat gun and gently warm the adhesive surface. Press the seam together carefully! At temperatures below +5°C, the product should be pre-stored for at least 1 day in a warm storage.
- Note that primer is required when the product is used as a joint strip for roof cassettes. Teccas Liquid Membrane is recommended as a primer, and for installation temperatures below +5°C, Primer K-80 should be used.
- Be mindful to gently load the surface and immediately address any damage or incorrect/visible fastenings with roofing adhesive equivalent to T-Fix or Sealing Adhesive K-36.
- Always cover with the surface layer (tiles, sheet metal, etc.) as soon as possible to avoid exposure to sunlight and adverse weather conditions. During the construction period, the product can be exposed to sunlight for up to a maximum of 12 months. In the usage stage, the product should be completely enclosed and protected from sunlight.
- The rolls should be stored upright on a flat, dry surface and protected from sun and precipitation.
Articles
- Name Art.nr Specification
Technical specification
- Weight (approx): 1500 g/m²
- Thickness: approx. 1.3 mm
- Coverage area (approx.): 4.95/7.5 m²
- Length: 15 m
- Width: 0.33/0.5 m
- Upper surface: Polyester felt
- Lower surface: Bitumen adhesive
- Asphalt: SBS bitumen
- Core: Polyester core
- Roll weight: 7.5/11.5 kg
- Aging resistance: Very good
- Waterproofness: Sealed/W1
This product is evaluated and registered with the following entities:
-
Registered in Basta's product database
-
Assessed in Sunda hus
-
Building product assessment level: 1.Accepted
-
Declared item in the Supply Chain Declaration Portal (SCDP) for New Buildings Gen. 4.
- Registered in the Swan's house product portal
This product is evaluated and registered with the following entities.
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!