Application Area
Priming of porous and/or rough surfaces.
Installation
Clean and dry the surfaces to be treated if necessary. The priming itself is done by brushing or rolling the surface with Primer K-80 in 1 to 2 layers. Each layer must dry completely before overcoating.
Important!
- Always store dry, protected from sun and heat.
- Clean the surfaces from loose particles, dirt, and grease.
- Store at room temperature for 1 day before use.
- Stir and mix thoroughly before use.
- Do not expose the product to high heat before drying. See safety data sheet.
- Do not overuse the Primer. Use the recommended amount and consider usage in sunny and warm weather.
- In cold, damp conditions, the drying time can be many times longer.
- Dried product and empty packaging, as well as fresh product classified as hazardous waste, must be disposed of according to legislation and authorities' instructions at the local waste management facility.
Articles
- Name Art.nr Specification
Technical specification
- Material: Liquid bitumen solution with filler.
- Consumption: approx. 0.2-0.4 l/m²
- Operating temperature: Minimum +5°C (use below +5°C significantly extends curing time)
- Dust dry at +20 °C: 2-3 hours at +20 °C, depending on the thickness of the layers
This product is evaluated and registered with the following entities:
-
Building Material Assessment Level: 3.Avoid
This product is evaluated and registered with the following entities.
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!