T-Vent replaces Mold Stopper

The T-Vent is installed in the outer roof as a ventilation solution to prevent condensation as well as moisture and mold damage. The more powerful T-Vent can independently replace a ventilated eave or ventilated ridge if our recommendations according to the installation instructions are followed. In cases of fire requirements with non-ventilated eaves, the T-Vent can be used above the eaves as an alternative. The Mold Stopper should primarily be seen as merely a reinforcement of existing ventilation.

T-Vent replaces up to five Mold Stoppers in capacity, which means fewer installations and interventions in the roof. The design also makes the installation process significantly easier with T-Vent as you only need to drill holes and screw, thereby avoiding time-consuming extra work with roofing felt adhesive for sealing around each installation.

Here you can find more information about the product T-Vent

Don't hesitate to reach out to your nearest contact at TECCA if you have any questions or concerns about T-Vent.