Wind deflector/Air gap board changes name and gets a variant with larger distances
In addition to the name change, we are enhancing the products with larger spacers that provide a greater air gap, making them more optimal for lower roof pitches.
Wind Deflector changes name to AirGap Eaves
AirGap Eaves wind deflector is made of 90% bio-based material. The product is equipped with spacers that ensure the ventilation gap and ventilation at the eaves. Very time-saving, thanks to easy and quick installation. For low-sloped roofs, less than 14° roof pitch, the board with 50 mm spacer is recommended. For roofs with a pitch of 14° or more, the board with 30 mm spacer is recommended. Ideally used together with our AirGap Extend ventilation board.
Read more about the product here: AirGap Eaves
Air Gap Board Changes Name to AirGap Extend
AirGap Extend air gap board is a diffusion-open product, made from 90% bio-based material. The product is equipped with spacers that ensure the ventilation gap for parallel roofs or cold attics. Very time-saving, thanks to easy and quick installation. For low-sloped roofs, less than 14° roof pitch, the board with 50 mm spacer is recommended. For roofs with a pitch of 14° or more, the board with 30 mm spacer is recommended. Part of the system solution with our wind deflector AirGap Eaves.
Read more about the product here: AirGap Extend
Note!Note new article numbers.
Item No. Description Size
265009 AirGap Extend c600 distans 30 mm
265010 AirGap Extend c1200 distans 30 mm
265013 AirGap Extend c600 distance 50 mm - New
265014 AirGap Extend c1200 distance 50 mm - New
