Pourseal-T
A system with liquid radon sealing Pourseal-T and self-adhesive casting mold Pourseal-T Frame used around penetrations in radon membranes. This solution is both air and radon tight. Used where many penetrations occur in a small area and it is difficult to access with other sealing methods.
User Benefits
-
Quick and easy application, the two liquids are mixed in the packaging they are delivered in
-
Self-leveling sealant - reaches where other sealing methods like tape do not work
-
Operates down to –10°C
Benefits for construction sellers/buyers
-
Reliable system with mold and casting compound for an air and radon-tight solution
-
Individually packaged - reduced waste
-
Time-saving and efficient sealing for many penetrations close to each other
Benefits for Sustainability Manager
-
No waste - quantity adjusted to the size of the molds
-
Minimized waste, the two liquids are mixed in the packaging they are delivered in
Application Area
Pourseal-T is a sealant used to create radon-tight penetrations. The product is advantageously used together with TECCA's casting molds. The sealant consists of two liquids that are easily mixed in the container they are delivered in. The liquid levels itself when poured into the mold.
Pourseal-T Frame are self-adhesive molds made of butyl adhesive, aluminum foil, and EPDM rubber. The butyl adhesive is equipped with protective paper that is removed during installation. The molds are available in 3 different sizes ranging from 120 mm to 260 mm.
The amount of sealant per bag is adjusted to avoid any waste when using the accompanying molds. The usage for the smallest mold is 1 package of Pourseal-T. For the medium size, 2 packages of sealant are required, and for the largest mold, the recommended amount is 3 packages.
Installation
The sealant is easily mixed in the bag it is delivered in, see separate assembly instructions.
Minimum Casting Layer: 15 mm
This product is evaluated and registered with the following entities.
Articles
- Name Art.nr Specification
Technical specification
- Operating temperature: at least 17 °C when mixing the liquids
- Temperature range lowest: -10 °C for curing
-
Estimated consumption:
1 package Pourseal-T for mold 120x120 mm
2 packages of Pourseal-T for casting mold 180x180 mm
3 packages of Pourseal-T for casting mold 260x260 mm -
Quantity:
300 ml per package
- Drying time: The curing time depends on the surrounding temperature (from 1 hour to several days for complete curing).
Related Products
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!