Covering Compound K-50
Black, elastic, and bitumen mass.
Works even in colder weather
Application Area
Reconditioning for roofs made of roofing felt or shingles.
Installation
Apply with a semi-soft coarse brush or roller.
Important!
- Always store dry, protected from sun and heat.
- Clean the surfaces from loose particles, dirt, and grease. Porous or dusty surfaces should first be coated with primer K-80.
- Store at room temperature for one day before use.
- Stir and mix thoroughly before use.
- Do not overuse the cover material. Use the recommended amount and consider usage in sunny and warm weather.
- Dried product and empty packaging, as well as fresh product classified as hazardous waste, must be disposed of according to legislation and authorities' instructions at the local waste management facility.
Articles
- Name Art.nr Specification
Technical specification
- Material: Liquid bitumen compound with filler
- Consumption: approximately 0.5 to 0.7 l/m²
- Operating temperature: +5°C to +25°C (use below +5°C significantly extends curing time)
- Heat resistance: > +100 °C, but does not float at higher temperatures either
- Dust dry at +20 °C: approximately 3-4 hours at +20 °C
This product is evaluated and registered with the following entities:
-
Building Material Assessment Level: 3.Avoid
This product is evaluated and registered with the following entities.
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!