Screw and washer for surface felt
Tecca Screw and washer is a screw with a pre-mounted washer for fastening the surface felt Toptite 3 Green on wooden substrates.
Provides maximum fastening
Requires fewer fastening points
Application Area
Used as an alternative fastening of Surface Felt Toptite 3 Green on wooden surfaces.
Installation
The center distance for screws in the middle zone is 50 cm and 25 cm in corners and edge zones (about 1m from edges). Approximately 30 screws (1 pack) are used per roll of surface felt. No screws should be visible after installation. See installation instructions Toptite 3 Green.
Important!
- See assembly instructions Toptite 3 Green
This product is evaluated and registered with the following entities.
Articles
- Name Art.nr Specification
Technical specification
- Material: Steel
- Surface Treatment: Hot-dip galvanized
- Washer diameter: 40 mm
- Screw diameter: 5.2 mm
- Length: 35 mm
- System: Torx 25
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!