Total:

BituTite

Flexible and self-adhesive sealing membrane made of bitumen with high diffusion density. Polyethylene film-coated top side and adhesive underside with protective film that is removed during installation.

Find retailers High-resolution images

Design

Quantity

Unit

Price/unit

Price information

Buy

Product Information

Application Area

For insulation against moisture and water. For use in sill insulation under masonry joints, floor connections to walls, and the basement foundation's connection to the footing.

Installation

Prepare the substrate and pre-treat the substrate with Primer K-80 if necessary. Remove the protective film underneath and carefully roll out the membrane with pressure (e.g., with a hand roller) against the substrate thereafter. Seams should be overlapped with a 5 cm overlap and pressure-sealed. After installation, the membrane should be protected from sunlight and mechanical impact. Also, see separate installation instructions (T-Block).

Important!

During installation and application, surfaces should be dry, clean, and free of grease. Rougher or more porous surfaces (e.g., concrete) should be pre-treated with primer K-80.
Should be applied at temperatures above +10°C (not below +5°C) as adhesion deteriorates at cooler temperatures. Pre-storage in a warm warehouse is recommended, as well as a warmer installation temperature for best results.
Store and keep upright, protected from sunlight, with a maximum temperature of +30°C.