T-Foil Basic
T-Foil Basic is an air and vapor barrier with good diffusion density and strength. The product is made of Polyethylene, which is resistant to heat, UV, and alkali. Additionally, the foil is fully recyclable in the cycle during installation waste and in the event of a future demolition of the building.
At least 50 years of aging resistance
Easy to assemble
More cost-effective alternative
Contributes to increased insulation capability
Possibility for faster drying
Application Area
T-Foil Basic is primarily used as an air and vapor barrier (internal climate screen) in the exterior walls, roofs, and floors of thermally insulated buildings. It contributes to an airtight and moisture-protected construction, preventing harmful moisture and vapor from being transported to sensitive building parts and minimizing energy losses in heated spaces.
Installation
T-Foil Basic air and vapor barrier should be installed in a system with airtight joint aids such as T-Flex sealing tape or T-Stos butyl for penetrations, etc. See separate installation instructions!
Generally, the climate screen is attached on the inside, closest to the heated side of the insulated frame.
The installation should, however, be offset into the insulation by a maximum of 1/3 of the total insulation thickness. This part acts as an insulated zone inside the climate shield and can be used as an installation space for electrical installations, etc., or serve as a buffer space for mechanical fastenings from the inside
the interior. This reduces air leakage in a completed building
Important!
- Store and keep packaged/protected from sunlight (UV radiation) or consistently higher temperatures (>35°C). The film has freely exposed (not built-in) UV protection that corresponds to the construction time (<6 months).
- If there are any doubts regarding the use of the climate screen and its properties, consult a building expert.
Articles
- Name Art.nr Specification
Technical specification
- Material: LD-Polyethylene (LD-PE)
- Surface weight: 103 g/m²
- Width: See respective article
- Length: See respective article
- Coverage area: The total area of the roll minus 200 mm overlap/connection.
- Vapor transmission resistance: 2000 x 10³ s/m (sd= 53 m)
- Waterproofness: Dense
- Aging resistance: At least 50 years
This product is evaluated and registered with the following entities:
-
Registered in Basta's product database
-
Assessed in Sunda hus
-
Building product assessment level: 1.Accepted
-
IQD 128
- Registered in the Swan's house product portal
This product is evaluated and registered with the following entities.
Related Products
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!