Total:

T-Foam

T-Foam is specially designed to meet today's high demands for laying floating laminate and parquet floors without glue. T-Foam is made of extruded foamed polyethylene with completely closed cells and is resistant to aging and alkalis. The product is available in several different lengths and also with vapor barriers in different thicknesses (T-Foam Duo 25 or T-Foam Duo 100), which gives the product different vapor tightness.

Flooring underlay according to requirements in EN 16354
Reduces impact sound
Levels out irregularities in the surface
Aging resistant for at least 50 years
100% recyclable

Find retailers High-resolution images

Design

Quantity

Unit

Price/unit

Price information

Buy

Product Information

Application Area

Used when laying both laminate and parquet floors for most types of joists where one wants to isolate structure-borne sound, level out irregularities, and provide increased comfort. The product has a leveling ability, impact sound-dampening properties, very good recovery ability after load and pressure, and is suitable for use against concrete substrates.

Important!

Storage and warehousing should always be done indoors, packaged or in a way that protects the product from sunlight (UV radiation) and heat (˃ +35°C). The maximum operating temperature when mounted on the floor is also +35°C. Higher temperatures primarily affect aging resistance.
On substrates of concrete, lightweight concrete, or floor leveling compound, with relative humidity (RH) over 60% (maximum 90%), an aging-resistant moisture barrier should be used (Tecca T-Foil) in combination with T-Foam as a moisture protection film. Alternatively, both layers can be replaced with T-Foam Duo, which has integrated moisture protection.
On substrates such as slab on ground, floor joists above warm or humid spaces, or floors with underfloor heating, moisture protection should always be combined as per the point above. However, the maximum relative humidity (RH) with moisture protection (vapor barrier) is 90%

This product is part of TESHELL® and is covered by our warranty program. Read more here

Articles

Name Art.nr Specification

Documents

Specification

Technical specification

Material: Extruded foamed LD-Polyethylene
Density: 30 kg/m³
Thickness: 2 mm
Length: 12,5 m / 62,5 m
Width: 1200 mm
Impact Sound Reduction: 17-19 dB (impact sound class 7)
Impact Sound Reduction (IS): ≥ 20 dB
Compression and Strength (CS): 20.4 kPa
Thermal Resistance (R): 0.04 m²K/W
Aging resistance: at least 50 years

Assessments

This product is evaluated and registered with the following entities:

Registered in Basta's product database
Assessed in Sunda hus
Building product assessment level: 1.Accepted
Declared item in the Supply Chain Declaration Portal (SCDP) for New Buildings Gen. 4.