T-Block Floor
Moisture barrier with long aging resistance that is optimal for high moisture content in concrete substrates. Effectively protects the upper floor covering against higher underlying moisture levels.
Highest durability
High moisture density (approximately 6 times denser than traditional building foil)
Recyclable
Application Area
T-Block Floor offers an optimal solution for effectively stopping moisture that can enter the house through the floor. The material is only 3 mm thick and the moisture barrier is about 6 times more moisture-resistant than traditional vapor barriers (building film). Additionally, you get a moisture-protected floor that is insulated, quiet, and comfortable to walk on.
T-Block Floor is made of high-quality HD polyethylene. The product is recyclable.
Important!
- Avoid walking on the carpet to prevent damage and punctures. The top floor should be installed as soon as possible after assembly. Otherwise, temporary protective covering should be done with construction board or similar.
- Follow the assembly instructions carefully. Ensure that the required tightness is achieved at the outer edges, joints, or pass-throughs.
- Use only compatible and approved accessories.
- The moisture protection mat should be stored before installation to avoid UV radiation (sunlight). Once installed and in use, the entire product should be concealed.
- Note that any potential moisture is not ventilated away with this passive method. If there is uncertainty about the moisture content of the subfloor, a professional should be contacted to perform a moisture assessment and suggest a solution.
Environmental Assessments
Building materials assessed for a better working environment.
Assessed by Sunda Hus for sustainable construction.
Declared item in Supply Chain Declaration Portal (SCDP) for New buildings gen. 4.
Registered in the Swan's house product portal
This product is evaluated and registered with the following entities.
Articles
- Name Art.nr Specification
Technical specification
- Material: HD-Polyethylene
- Width: 2 m
- Length: 20 m
- Height: 3 mm
- Air gap: ≥ 2 mm
- Vapor transmission resistance: 19 x 10⁶ s/m
- Recommended installation temperature: > +5 °C
- Color: Yellow
Accessories for T-Block Floor
Related Products
Do you need help or have questions about our products?
Try our chatbot
Our chatbot Tea is based on AI and has been trained on all the information available on the website. You can find Tea at the bottom right corner.
Search among questions and answers
We often receive many interesting questions, and we have compiled the most common ones in one place.
Contact our staff
If you need to talk to us, we are of course also available by phone or email!